Leica Disto D2 Laser Measurer

Our newest take on the classic Leica DISTO™ D2.

Now with Bluetooth®, a fully integrated intelligent endpiece, a bright white display and an ISO certified measuring engine that drives 1,5 mm accuracy and 100 m measuring range.

The Leica DISTO™ D2 is a 7 measurement mode laser distance meter accurate to 1.5 millimeters. It features an intuitive back-lit LCD display in a 100 gram package that is small enough to fit in your pocket.

Use Bluetooth® to send measurements into apps running on mobile devices.

The D2 measures from its base by default and can be configured to measure from the front. 

Flip out the intelligent endpiece to 90º to hook onto outside corners or extend the endpiece fully for inside corners. The D2 will automatically measure from the end of its flip-out endpiece when fully extended. Combined with the Min/Max function, the endpiece allows you to get the tool all the way into corners for accurate diagonal measurements as shown in this Intelligent Endpiece video. 

The D2 calculates area and volume, and remembers the last 10 measurements taken. Use the Add/Subtract capability to combine measurements to get a precise reading of the total wall area of a room (aka "the painter function").

The D2 includes a Pythagoras function for indirect height or width measurements. However, in a tool this size that cannot be mounted to a tripod we recommend using the Pythagoras for estimates or rough measurements. If you need precise indirect measurements, a Laser Distance Meter with a tilt sensor is your best bet.

Laser Measurer system

Specifications

Leica Disto D2 Video

Download Brochure

Error 156: The transverse tilt is greater than +/- 10°
To resolve: Hold the instrument without any transverse tilt

Error 162: Calibration mistake
To resolve: Make sure the device is placed on an absolutely horizontal and flat surface. Repeat the calibration procedure. If the message still occurs, contact the dealer 

Error 204: Calculation error
To resolve: Repeat measurements, make sure to follow the sequence according to the manual

Error 205: S910 memory full
To resolve: Delete memory

Error 220 & 224: Hardware error
To resolve: If the message continuously appears, contact the dealer for service

Error 240 & 245: Data transfer error
To resolve: Re-connect device with computer and repeat procedure

Error 252: Temperature too high
To resolve: Let device cool down

Error 253: Temperature too low
To resolve: Let device warm up

Error 254: Battery voltage too low for measurements
To resolve: Change batteries

Error 255: Received signal too weak, measuring time too long
To resolve: Change target surface (i.e. white paper)

Error 256: Received signal too high
To resolve: Change target surface (i.e. white paper)

Error 257: Too much background light
To resolve: Shadow target area

Error 258: Measuring outside of measuring range
To resolve: Correct range

Error 260: Laser beam interrupt
To resolve: Repeat measurement

Error 284: Laser defect
To resolve: If message continuously appears, contact the dealer for service

Error 288-294: Hardware error
To resolve: If message continuously appears, contact the dealer for service

Error 300: Smart base not folded out
To resolve: Fold out Smart Base

Error 301: Device was moved, levelling not valid anymore
To resolve: Perform levelling again. Levelling with invalid levelling is possible, but it will affect the accuracy

Error 302: S910 "Point data transmission" is selected, but WLAN is off
To resolve: Switch on WLAN

Error 303 - 306: Error with Leica DST 360 Adapter
To resolve: Repeat procedure and if message still occurs, contact your dealer

Error 340: WLAN: Data transfer error
To resolve: Repeat procedure

Error 341: Authentication error
To resolve: Use correct password

Error >1000: Hardware error
To resolve: If message continuously appears, contact the dealer for service

Error 14041: Smart Base defect
To resolve: If message continuously appears, contact the dealer for service