Major Tech MT290 Electric Vehicle Supply Equipment Adaptor
The MT290 is an extender for interfacing Electric Vehicle Supply Equipment (EVSE) to test the socket of an installation tester for verification of electrical safety and function of all single and three phase EV charge points. This easy-to-use instrument, used in conjunction with the MT390 or similar meter offers an electrical contractor a universal tool designed to thoroughly test Mode 3 AC Electric Vehicle charging stations. The adaptor is designed to simulate the connection of an electric vehicle to an under-test charging point, with the safety feature of the PE Pre-Test, the PE conductor can be tested for possible presence of dangerous voltage against earth. A rotary switch for the Proximity Pilot (PP) state “Cable Simulation” can simulate various current capabilities of charging cables, while the rotary switch for Control Pilot (CP) state “Vehicle Simulation” can select and simulate various charging states. Measurements on live conductors can be undertaken by either using the front mounted mains socket or the 4mm measuring terminals of L1, L2, L3, N and PE of the EVSE adaptor. Standard accessories include the Type 2 and Type 1 plugs complete with a hard carrying case. The housing of the MT290 is IP54 rated for dust and splash proof water protection.
- Testing adaptor for Mode 3 supply equipment
- EV connection for Type 2 and Type 1
- Measuring terminals L1, L2, L3, N and PE
- Mains socket for connection to check an external load
- Single phase system with Max input voltage up to 250V
- Three phase system with Max input voltage up to 430V
- Separate phase indication by the LED lamps to indicate voltage present
- PE-Pre-test function
- Simulation of CP Error “E” and PE Error (Earth Fault)
- Rotary dials simulate PP State or CP State
- Works in conjunction with the MT390
Specifications:
| Function | Range |
| Input Max Single Phase System | 250V |
| Input Max Three Phase System | 430V, 50/60Hz, |
| Input Max | 10A200.0mV – 600V |
| EVC-200 Connector | AC charging mode 3. Suitable for Type 2 wall top contact or fixed cable with vehicle connection (type 2 7P operation phase) |
| EVC-100 Connector | AC charging mode 3. Suitable for Type 1 with vehicle connection (type 1 5P single-phase) |
| PE Pre-Test | Yes
open (Error condition or disconnection of plug) 13A Coding for maximum current of the EV cable |
| PP Stimulation | 20A
32A EVSE is connected and can operate in any, 63A of these coding position. |
| CP Stimulation | states A (EV disconnect),
states B (EV connected), states C (EV charged without ventilation), states D (EV charged with ventilation) |
| CP Error “E” | On (CP short to PE via diode / off |
| PE Error | On (PE error) / off |
| Size | 227 x 115 x 60mm |
| Weight | 832g (without connection cables) |
Accessories:
- Hard Carrying Case
- Instruction Manual
| Shipping | This Item Ships from Fremantle, Perth, Western Australia |
Please allow 2 - 10 days for your order to arrive.
Although Most Stocked Products will generally Ship Overnight. We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it!
Returns are easy.
simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!
Description
Major Tech MT290 Electric Vehicle Supply Equipment Adaptor
The MT290 is an extender for interfacing Electric Vehicle Supply Equipment (EVSE) to test the socket of an installation tester for verification of electrical safety and function of all single and three phase EV charge points. This easy-to-use instrument, used in conjunction with the MT390 or similar meter offers an electrical contractor a universal tool designed to thoroughly test Mode 3 AC Electric Vehicle charging stations. The adaptor is designed to simulate the connection of an electric vehicle to an under-test charging point, with the safety feature of the PE Pre-Test, the PE conductor can be tested for possible presence of dangerous voltage against earth. A rotary switch for the Proximity Pilot (PP) state “Cable Simulation” can simulate various current capabilities of charging cables, while the rotary switch for Control Pilot (CP) state “Vehicle Simulation” can select and simulate various charging states. Measurements on live conductors can be undertaken by either using the front mounted mains socket or the 4mm measuring terminals of L1, L2, L3, N and PE of the EVSE adaptor. Standard accessories include the Type 2 and Type 1 plugs complete with a hard carrying case. The housing of the MT290 is IP54 rated for dust and splash proof water protection.
- Testing adaptor for Mode 3 supply equipment
- EV connection for Type 2 and Type 1
- Measuring terminals L1, L2, L3, N and PE
- Mains socket for connection to check an external load
- Single phase system with Max input voltage up to 250V
- Three phase system with Max input voltage up to 430V
- Separate phase indication by the LED lamps to indicate voltage present
- PE-Pre-test function
- Simulation of CP Error “E” and PE Error (Earth Fault)
- Rotary dials simulate PP State or CP State
- Works in conjunction with the MT390
Specifications:
| Function | Range |
| Input Max Single Phase System | 250V |
| Input Max Three Phase System | 430V, 50/60Hz, |
| Input Max | 10A200.0mV – 600V |
| EVC-200 Connector | AC charging mode 3. Suitable for Type 2 wall top contact or fixed cable with vehicle connection (type 2 7P operation phase) |
| EVC-100 Connector | AC charging mode 3. Suitable for Type 1 with vehicle connection (type 1 5P single-phase) |
| PE Pre-Test | Yes
open (Error condition or disconnection of plug) 13A Coding for maximum current of the EV cable |
| PP Stimulation | 20A
32A EVSE is connected and can operate in any, 63A of these coding position. |
| CP Stimulation | states A (EV disconnect),
states B (EV connected), states C (EV charged without ventilation), states D (EV charged with ventilation) |
| CP Error “E” | On (CP short to PE via diode / off |
| PE Error | On (PE error) / off |
| Size | 227 x 115 x 60mm |
| Weight | 832g (without connection cables) |
Accessories:
- Hard Carrying Case
- Instruction Manual
Shipping
| Shipping | This item ships to |
Delivery & Returns
Please allow 2 - 10 days for your order to arrive.
Although Most Stocked Products will generally Ship Overnight. We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it!
Returns are easy.
simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!
Reviews
6 Great reasons to buy from us:
-
30 Days Return
If your product is faulty or damaged under manufacture warranty, simply send it back to us and we'll cheerfully replace it or fix the problem for you. -
Returns are Easy
Simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap! -
Best Price Guarantee
In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down. -
We guarantee your satisfaction
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again. -
100% Safe & Secure
Ordering from Laserman Technologies is 100% safe and secure so you can rest easy. Your personal details are never shared, sold or rented to anyone either. -
Best Laser Warranties in the Business
Laserman the Best Laser Level, Pipe Laser and Laser Measuring Warranties in the Business - Now thats unbeatable value !!.
